Audi is one of the world’s most demanded luxury cars due to its powerful performance and advanced features. Some of these features such as check engine lights act as a warning system in your car that illuminates the car when something is wrong. Most drivers are confused about whether to drive their car under these circumstances.
If the ‘check engine’ light suddenly appears on your Audi, it is probably time to bring the car to serve. There are many different reasons why your Audi engine light can come. Some problems are minor, with simple improvement, while others may be more complex and the car requires large repair. Many times, holding a problem quickly protects your vehicle from too much engine and mechanical system problems.
The Check Engine light is a part of your Audi’s onboard diagnostics system or OBD. When it takes a nap, it indicates that the car’s computer has discovered a mistake in the engine or emission system. It can be a stable or glowing light. The difference between the two methods on light is that there is a simple issue and the other is an emergency.
Here’s what you need to do
- Don’t Panic: First of all, don’t worry. A check light does not necessarily mean a big repair. Sometimes it’s caused by something very minor.
- Check Gas Cap: The primary reason the CEL comes on is because of a loose or bad gas cap. If the cap is not properly closed, then fuel vapours leak, and this might activate the light. To correct this, just tighten the gas cap and check if the light will go off after a few drives. If the light continues to stay on and you’re sure the gas cap is the issue, then it has to be replaced.
- Observe Car’s Performance: Observe how your Audi is running. Is there any problem with performance, a squeaking sound, or any other unusual behavior? If the car appears to be in good working condition, then the problem could be a minor issue. But if you observe huge shifts in performance, it is advisable to seek the services of a mechanic.
- Use an OBD-II Scanner: You can use an OBD II scanner to diagnose the CEL. It’s a very handy device in diagnosing the CEL. You can go to an auto parts store where scanning services are free. Connect your scanner to the dashboard port and read off the error codes. The description will be much clearer, showing you what is behind the problem.
- Conduct Research: After getting the codes, you can search for them on the internet or refer to your Audi manual. Some of the common codes include P0300 random misfire detected, P0420 Catalyst system issues, among others. Information about these codes will help you understand how serious the problem is and the action to be taken after that.
- Address Minor Issues: A small problem, such as a loose gas cap or worn spark plugs, may be indicated by the trouble code. These are easy problems to resolve; just turn the gas cap until it’s tight, replace the spark plugs or some other minor adjustment will do. Once the problem is resolved, the light should go out after several drive cycles.
- Regular Maintenance: The best way to avoid Cel light flashing is your regular maintenance of your Audi. Make sure to schedule your car in relation to taking it for servicing, and be sure to replace oil and air filters when it is replaced. This would mean that if a problem was to arise, it can be identified early before becoming a major issue.
It is necessary that a mechanic inspect your Audi at any time check engine lights until the problem is a clear issue that you can solve on your own, such as a loose gas cap. Keep in mind that when your Audi engine lights start glowing, it is an indication that your car has more serious problems. If the check engine lights start glowing, stop driving your vehicle as soon as possible and contact our service department for repair.
