We are certain the following scenario sounds familiar: You get into your car, ready to hit the road, only to find that dreadful click-click sound as you turn the key. Yup, it is a dead battery! Before panic starts to set in or you start Googling “car jumpstart near me,” know that jumpstarting your car is an easy DIY task. In this blog, we take you through how to safely jump-start your car and when it’s time to call in the pros for a car repair Dubai.
Why Does Your Car Need a Jumpstart?
Before we explain the steps, let’s briefly describe why you might need a car jumpstart in the first place. Nine times out of ten, it’s because your battery has lost its charge. This might be the simple and foolishly harmless event of forgetting the lights on or even just a door not totally shut, all the way to an old battery that’s seen better days.
If you find yourself Googling “car jumpstart near me,” you’re not alone! After all, driving in Dubai might be a bit frustrating when the batteries are overexerted during the scorching summer months.
What You Need to Jumpstart Your Car
Essentially, jumpstarting your car requires a pair of jumper cables and another car with a charged battery. If you are not surrounded by any other car, there is no need to be anxious since there are lots of car service Dubai providers who can provide you on-site jumpstarts.
Steps to Jumpstart a Car
Assemble Your Tools: To jumpstart your car, you will need jumper cables and a live vehicle or any car jumpstart Dubai in case there is nobody around. It is something which you should have, and you can store them in your trunk at all times.
Put Your Cars in Position: Find a vehicle with a good battery to give you a hand. Position the operating car nose-to-nose or side-by-side to your car as near as possible to reach both batteries with the cables. Important: Ensure that both vehicles are turned off before you hook up the cables.
Hook up the Jumper Cables: Here’s where you really want to pay attention:
- Red Clamp to Dead Battery’s Positive (+) terminal.
- Red Clamp to the Working Car’s Positive (+) terminal.
- Black Clamp to the Working Car’s Negative (-) terminal.
Black Clamp to an unpainted metal surface on your car’s engine block. Avoid connecting it directly to the dead battery’s negative terminal.
Turn on the Working Car: Once the cables are well connected, start the working vehicle. Allow this to run just for a couple of minutes to give time for your battery to build up. This is where your car gets its much-needed boost!
Crank the Engine: Now, try to crank your car. If all went well it should start right up! Keep both cars running for at least 5-10 minutes so that your battery can get a good charge.
Remove the Cables: Carefully remove the jumper cables in this order:
- Black Clamp from your car.
- Black Clamp from the working car.
- Red Clamp from the working car.
- Red Clamp from your car.
When to Seek Professional Help
If after a few tries, your car doesn’t start, it is certainly more serious than a dead battery. This would be the right time to either book a car service in Dubai or look up on the service for a car jumpstart near me. Suspecting an alternator failure or any other electrical problem, only a professional can diagnose and fix this problem.
Moreover, if one finds oneself jumpstarting the vehicle quite often, that could be a hint for car repair or replacement of the battery. Most of the car repair Dubai services provide services for mobile battery replacement; one can just sit at home while they get the ride in shape.
